Tilting Skimmers

Belmar offers a wide range of different units for skimming the liquid surface. All tilting skimmers are actively self-adjusting, ensuring that only the area of the liquid surface where the concentration of oil is greatest is skimmed.
In order to select the correct tilting skimmer, the capacity, space ratios, level variation and particle contamination of the liquid surface must be taken into account.
The first step is to choose the right cup size for the. see the table below. A-cup is the largest and E-cup the smallest.
Then select a type of tilting skimmer suitable for the other factors that apply, see the chart below.
Tilting Skimmer Type 01
BELKI tilting skimmer with elbow 1/2″ is a versatile tilting skimmer for large level variations. It can be used on almost all BELKI oil separators from type 321 and upwards.
...
Tilting Skimmer Type 02
BELKI tilting skimmer with elbow 1/4″ is the tilting skimmer which is most frequently used together with the oil separator type 211H. The skimmer will fit in most tanks, and can operate with a level variation of up to 140 mm.
...
Tilting Skimmer Type 03
BELKI tilting skimmer with guide is used when only limited space is available in the machine tank. The length of the suction pipe can be varied to equalize level variations.
...
Tilting Skimmer Type 04
BELKI’s floating skimmer is used for larger bath surfaces and large level variations. The floating skimmer is versatile and available in various forms – in compact design, with 3 or 4 balls and different suction cups, as well as with guiding arms.
...
Tilting Skimmer Type 08
BELKI tilting skimmer can be used in tanks with defined level variations. Due to the tilting and rocking movement, the tilting skimmer automatically aligns itself to the bath surface. Due to its own movement, a tilting skimmer can compensate for defined level variations. These variations are based on the size ...
Box Suction Type 20
The BELKI box suction is a special skimmer that is used, when space is limited and there are large level variations. It has an inlet pipe, a vent pipe and a suction pipe. The inlet pipe adapts automatically to the fluid level and thus effectively cleans the bath surface from ...
Cup Suction Type 40
The BELKI cup suction is used if, in addition to tramp oils, particles and chips are also present on the bath surface. As a special suction, this cup suction is used with the BELKI Smart Unit and with other oil separators, among others, in connection with the BELKI vacuum pump. ...
Oil Skimming Cups
The BELKI cups type A to type E are used when defined, known level variations are present. Due to their tilting movements, they are self-regulating and automatically compensate for level variations from 35 mm (type E and D) to 150 mm (type A). Additionally, the cup type B is available ...